Prof Dr. Devrim Balköse (Emekli)

 

 

 Gülsüm Devrim BALKÖSE

Prof. Dr.   Devrim Balköse

İzmir Yüksek Teknoloji Enstitüsü Kimya Mühendisliği Bölümü, Urla, İzmir

   Telefon: +90 232 750 6652  Faks: +90 232 750 6645

Araştırma grubumuz için  Devrim Balköse Araştırma Grubu adresini ziyaret ediniz.

Eğitim:

  • B.S. Chemical Engineering Middle East Technical University
  • M.S. Chemical Engineering Ege University
  • PhD Physical Chemistry Ege University

Tecrübe:

Research assistant ,Textile Department and  Chemistry Department of Ege University, 1970-1976, Buca Önlisans Yüksek Okulu 1976-1979, Chemistry Department of Chemistry Faculty of Ege University 1979-1982

Assistant Prof. ,  Chemical Engineering Department of Ege University, 1982

Associate Prof. , in 1983 in Macromolecular Chemistry

Associate Prof., Chemical Engineering Department of Ege University, 1983-1991

Prof. , in Process and Reactor Design  1989

Prof. ,  Chemical Engineering Department of Ege University,   1989-2000

Head of Process and Reactor Design Group of Chemical Engineering department of Ege University, 1991-1994

Prof. ,  Chemical Engineering Department of İzmir  Institute of Technology,   2000- 26.12.2013

Head of Chemical Engineering Department  of İzmir Institute of Technology   2000-2010

Retired from İzmir Institute of Technology   at 26.12.2013

Araştırma Alanları:

Polymer Science and Technology, Process Development, Lubricants, Polymer additives, Composite materials

Yayınlar:

  1. Ulutan, S., S. Yetgin, et al. (2013). “Flexible PVC-Silica Composites as an Adsorptive Material for Water Soluble Dyes.” Polymers & Polymer Composites 21(3): 177-181.
  2. Ozmihci, F. O. and D. Balkose (2013). “Effects of particle size and electrical resistivity of filler on mechanical, electrical, and thermal properties of linear low density polyethylene-zinc oxide composites.” Journal of Applied Polymer Science 130(4): 2734-2743.
  3. Kurt, E., C. Y. Ozcelik, et al. (2013). “Preparation and Characterization of Flexible Polyvinylchloride-Copper Composite Films.” Polymers & Polymer Composites 21(3): 139-143.
  4. Sahin, E., F. Y. Mahlicli, et al. (2012). “Preparation and characterization of flexible poly(vinyl chloride) foam films.” Journal of Applied Polymer Science 125(2): 1448-1455.
  5. Egbuchunam, T. and D. Balkose (2012). “Effect of Supercritical Ethanol Drying on the Properties of Zinc Oxide Nanoparticles.” Drying Technology 30(7): 739-749.
  6. Alp, B., M. Gonen, et al. (2012). “Dehydration, Water Vapor Adsorption and Desorption Behavior of Zn B3O3(OH)5 . H2O and Zn B3O4(OH)3.” Drying Technology 30(14): 1610-1620.
  7. Savrik, S. A., D. Balkose, et al. (2011). “Synthesis of zinc borate by inverse emulsion technique for lubrication.” Journal of Thermal Analysis and Calorimetry 104(2): 605-612.